Chat with us, powered by LiveChat
Home>Products>Incubators>Shaking Incubators>Benchtop Thermostatic Oscillator, ICB-S200

Benchtop Thermostatic Oscillator, ICB-S200

  1. Control mode: P. I. D (Microcomputer scans the micro-processing chip)
  2. Display mode: LCD (large liquid crystal screen)
  3. Convection mode: Forced convection
  4. Oscillation mode: Gyratory
  5. Speed range (r/min): 30-400

Share the product



1.The domestic original single-axis balanced drive technology, the amplitude is steplessly adjustable, to meet the needs of different dissolved oxygen.

2.In order to improve the cultivation effect, you can use the gyro/reciprocating switching oscillation.

3.Oscillation amplitude step-less adjustment function, the oscillation frequency is 30-400r/min.

4.Convenient design makes it easy to adjust the oscillation amplitude or switch the oscillation.

5.Intelligent acoustic-optic alarm environment scanning micro-processing controller.

6.The large LCD back lit LCD display shows the set parameters and measured parameters.

7.The operating parameters are encrypted and locked to avoid human misoperation.

8.Run parameter memory function to avoid tedious operation.

9.High-quality variable frequency motor, low vibration, low noise, high efficiency, wide speed regulation, maintenance-free, energy-saving, and long-lasting operation.

10.Over-temperature sound and light alarm function, the motor overheating, temperature out of control, and abnormal over-temperature instruments automatically cut off their respective power supplies.

11.With a power-off recovery function, the device can automatically resume operation according to the original set program after the external power supply suddenly loses power and then comes back on again.

12.The circuit for controlling acceleration ensures that the oscillator starts slowly, accelerates steadily, and ensures the safety of experimental samples.


Product model ICB-S200
Control mode P. I. D (Microcomputer scans the micro-processing chip)
Display mode LCD (large liquid crystal screen)
Convection mode Forced convection
Oscillation mode Gyratory
Drive mode Balance drive by single shaft
Ambient temperature requirement/ ℃ 15-35
Curve programming
Programming settings of repetition, steps and eight-section curves
Safety functions Audio and light alarm for temperatures above or below the upper or lower limit; alarm for speeds above or below the upper or lower limit; sensor fault identification, stand-alone over-temperature protector, stand-alone leakage or over-current protection and refrigerator overload protection.
Additional functions Speed storage, automatic stop, temperature and speed correction, monitoring timer, clock display, start up after power again, parameter memory, parameter encryption, one-touch factory reset
Temperature control range/ ℃ 4-60
Accuracy of temperature /℃ 0.1
Temperature fluctuation /℃ ±0.2
Temperature uniformity /℃ ± 1(at 37℃)
Speed range /r/min 30-400
Speed accuracy
Amplitude of rocking plate/ mm 25
Timing range/ min 0-999.59
Size of rocking
plate /mm
Number of rocking
Net weight /kg 100
Gross weigh/t kg 132
Volume/ L 69
Chamber size /mm 460*500*350
Overall dimensions
Height without
cover /mm
Power/ w 560
Power supply AC 200-240V ,50-60Hz
Material of chamber High-quality 304 stainless steel polished plate
Partial materials High-quality nodular cast iron, channel steel, angle steel, medium plates and cold rolled steel sheets
Material of outer
ABS special engineering plastics, anti-corrosive and rustless


    Contact Us Now!

    We will usually contact you within 24 hours. You could also call us (+86-531-88982330) during working hours ( 8:30 am to 5:45 pm UTC+8 Mon.~Sat. ) or use the website live chat to get prompt reply.

    Contact Info

    17th floor, Mingsheng Building, Xinluo Street, Jinan

    Phone: +86-531-88982330

    Fax: +86-531-88983691


    Go to Top