The left and right sides of the operating table are equipped with a back plate adjustment hand wheel and a leg plate manipulation hand wheel. No matter on the left or right side of the operating table, the position of the back plate and the leg plate can be manipulated;
On the right side of the operating table is equipped with a roll adjustment crank 7 that controls the left or right tilt of the operating table and a lumbar plate adjustment crank 6 that controls the action of the lumbar plate;
The forward and backward tilt adjustment handle that controls the forward or backward tilt of the operating table is installed on the right side of the operating table. This handle can also be removed and replaced on the left side of the operating table for operation;
The lifting of the operating table is adjusted by the structure of the oil pump, imported hydraulic ram, the oil in the oil pump is pumped out and installed in the barrel when leaving the factory, the oil pump cannot be raised, the user needs to slowly add the oil in the oil barrel from the funnel to the oil pump ( The oil pipe and funnel can be taken out after refueling). When the platform rises, the pedals of the oil pump can be stepped on continuously, and the rise can be automatically stopped when the platform rises to the highest point. When the table is lowered, the foot of the oil pump can be stepped on to the lowest position, and the table can be lowered slowly;
The bed chassis is equipped with rotating casters for easy movement. It is controlled by a landing mechanism, the bed is fixed or moving, and the same pedal is used. When the landing pedal is stepped down, the rotating casters in the chassis are lowered, and the chassis is lifted up, and the bed can be pushed. When the pedals are released, the bed will fall to the ground fixed.