- Multi-reading feature
- 6-inch LCD screen
- IP54 waterproof
- Settable cell constant
Benchtop Conductivity Meter, CON-B200EM
Description
The conductivity meter is a water quality analysis instrument developed for high-end water quality management and automatic control of medical multi-effect distilled water systems, boiler bottom water, condensate water, and heat exchange systems operating in higher temperature environment.
Advantages
6-inch high resolution LCD display screen.
Multi-reading feature allows auto-read and continuous-read.
Automatic/Manual temperature compensation ensures accurate results.
Auto-hold feature senses and locks the measurement endpoint.
Data Storage: 50 sets for each parameter.
Reset feature automatically resumes all settings back to factory default options.
IP54 waterproof.
1 point calibration with Standard Recognition.
Cell constant is settable
Specifications
| Model | CON-B200EM | |
| Conductivity | Range | 0.00 μS/cm to 200 mS/cm |
| Resolution | 0.01 μS/cm minimum, various with range selection | |
| Accuracy | ±1.0% FS | |
| Reference Temperature | 25 ºC | |
| Calibration Points | Up to 1 | |
| Standard Recognition | 84μS/cm, 1413μS/cm, 12.88mS/cm | |
| TDS | Range | 0.00mg/L~100g/L |
| Resolution | 0.01mg/L minimum, various with range selection | |
| Accuracy | ±1.0% FS | |
| Measurement | Reading Mode | Auto-Read, Continuous |
| Reading Prompts | Reading, Stable, Locked | |
| Temp. Compensation | MTC | |
| Data management | Data Storage | 50 results each |
| Inputs | Conductivity with Temp. Probe | 5-pin aviation connector |
| Display options | Backlight | Yes |
| Auto Shutdown | 300, 600, 1200, 1800, 3600sec., off | |
| IP Rating | IP54 | |
| General | Electricity | AC Adapter, 100-240V AC input, DC9V output |
| Dimensions | 242 × 195 × 68 mm | |
| Weight | 900g | |
Get Social