- 1 to 3 points calibration
- Automatic temperature compensation
Benchtop Conductivity Meter, CON-OL650
Description
- 1 to 3 points calibration with automatic recognition for conductivity standards
- Selectable cell constant, temperature coefficient and TDS conversion factor
- Automatic temperature compensation ensures accurate readings over the entire range
- Setup menu allows to set the number of calibration points, alarm limits, hysteresis value, 4 to 20mA output, etc.
- Reset function automatically resumes all settings back to the factory defaults
Optional Conductivity Electrodes
- IE-50LT : Suitable for measuring the pure water (< 10µS/cm)
- IE-50MT: Suitable for general purpose applications
- IE-50HT : Suitable for measuring the seawater (> 20mS/cm)
Ordering Information
CON-OL650: Controller, IE-50MT industrial conductivity electrode
Specifications
| Model | CON-OL650 | |
| Conductivity | Range | 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
| Resolution | 0.001, 0.01, 0.1, 1 | |
| Accuracy | ±1% F.S. | |
| Calibration Points | 1 to 3 points (84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm) | |
| TDS | Range | 0~10.00, 100.0, 1000ppm, 10.00, 200.0ppt |
| Resolution | 0.01,0.1,1 | |
| Accuracy | ±1% F.S. | |
| TDS Factor | 0.1~1.0 (default 0.5) | |
| Temperature | Range | 0~100°C/32~212°F |
| Resolution | 0.1°C/0.1°F | |
| Accuracy | ±1°C/±1.8°F | |
| Offset Calibration | 1 point, reading ±10°C | |
| Communication | Signal Output | 4~20mA |
| Load | Max. 500Ω | |
| Low or High Alarm | 0.02µS/cm~20.0mS/cm, selectable | |
| Communication Interface | RS485 | |
| Connection Terminals | Detachable screw terminals | |
| Other Specifications | Temperature Compensation | 0~100°C, automatic |
| Environmental Conditions | Ambient temperature <60°C, relative humidity< 80% | |
| Power Requirements | DC24V | |
| Dimensions | 96(L)× 96 (W)×75(H)mm | |
| Weight | 350g | |
Get Social