- Independent blowpipes, without cross contamination
- Slot on each test tube hole, convenient for observing the concentration status of the sample in real time.
- Gas needle channel can be used in combination or individually
- High precision and wide range of temp. control.
- Lifting seat can be adjusted steplessly with one hand
Nitrogen Evaporator, NEC160-1C
Description
Descriptions
NEC160-1C Nitrogen Evaporator/Sample Concentrator (visible) is a high precision temperature control instrument with microprocessor controlled and PID fuzzy controlled technique, its working principle is to blow nitrogen rapid, continuous on the heating surface of the sample. Instead of traditional water bath device, this adopts heat-conducting medium, which is high purity aluminum with good heat transfer. The Test tubes are held in a block, and blowing a large number of samples at one time.
Features
- High precision and wide range of temp.control.
- Blowing a large number of samples at one time.
- Blowing each sample independently.
- Amount of airflow can be adjusted.With special slotting-design block, surface location of concentrated samples can be observed.
- Easy operation; safe and reliable to use.
Specifications
| Model | NEC160-1C |
| Temp range | RT.+5°C -160°C |
| Temp accuracy | ±0.5℃(@40℃) |
| Temp accuracy | ±1℃(@120℃) |
| Temp uniformity | ±0.5℃ |
| Display accuracy | 0.1℃ |
| Time range | 1-99h59min/∞ |
| Heating time | ≤15min(from 25℃ to 160℃) |
| Max vertical travel | 200mm |
| Max gas usage | 15L/min |
| Max gas pressure | 0.1Mpa |
| Block qty | 1 |
| Max. power | 500W |
| Electricity | AC220V or AC110V /50~60Hz |
| Dimensions | 260*220*475mm |
| Weight | 7.3kg |
Product accessories
| Model | Diameter(mm) | Depth(mm) | Capacity |
| RC02 027 001 | 10.5 | 50 | 12 |
| RC02 027 002 | 12.5 | 50 | 12 |
| RC02 027 003 | 13.5 | 50 | 12 |
| RC02 027 004 | 15.5 | 50 | 12 |
| RC02 027 005 | 16.5 | 50 | 12 |
| RC02 027 006 | 19.5 | 50 | 12 |
| RC02 027 007 | 20.5 | 50 | 12 |
Get Social