- 1 or 2 points calibration
- Setup menu contains 6 options
- Accuracy: ±0.5mg/L
Pocket Dissolved Oxygen Tester, DO-P10
Description
The DO-P10 is a economical Pocket Dissolved Oxygen Tester featuring one or two points calibration as well as automatic temperature compensation
• Pornographic dissolved oxygen electrode is economy and easy to use
• 1 or 2 points calibration using the air-saturated water or zero oxygen solution
• Salinity and barometric pressure compensations eliminate the measurement error
• Automatic temperature compensation ensures accurate readings over the entire range
• Auto-Read function senses and locks the measurement endpoint
• Auto-Power Off effectively conserves battery life
• Setup menu allows setting the number of calibration points, concentration unit, temperature unit, etc.
• Reset function automatically resumes all settings back to the factory defaults
Ordering Information
DO-P10: Tester, DO100 dissolved oxygen electrode, electrolyte solution, membrane cap and carrying case
Specifications
| Model | DO-P10 | |
| DO | Range | 0.0~20.0mgfLor ppm |
| Resolution | 0.1mg/L | |
| Accuracy | ±0.5mg/L | |
| % saturation | Range | 0.0-200.0% |
| Resolution | 0.001 | |
| Accuracy | ±2.0% | |
| Other Specifications | Calibration Points | 1or2 points |
| Temperature Compensation | 0~40°C/32~104°F, automatic | |
| Barometric Pressure Correction | 450~850mmHg, manual | |
| Salinity Correction | 0~35g/L, manual | |
| Hold Function | Manual or auto-endpoint | |
| Auto-Off | 8 minutes after last key pressed | |
| Operating Temperature | 0~50℃ | |
| Display | Dual-line LCD (21× 21mm) | |
| Power Requirements | 2×1.5V AAA batteries | |
| Battery Life | Approximately 200 hours of continuous use | |
| Dimensions | 175(L)×40(Dia.)mm | |
| Weight | 100g | |
Get Social