- Flow: 0.0063-1460mL/min
- RPM: 0.1-400rpm
- Dispensing volume: 15μL-9999L
- Dispensing time: 0.1-999.9S
- Dispensing mode: Timed / Copy / Volume dispense
Peristaltic Pump, PP-Z400/PH-Z1460
1. High definition LCD (3.5 inch) shows all the parameters at the same time, and an all-new interface that makes setup and operation easier than ever.
2. Using “double CPU” control, drive and control are separated, Accurate one-key filling let repeating precision up to ± 0.5%. Can be widely used in the production line for timing and quantitative transmission.
3. Featured dispensing and transmission working mode and including three kinds of dispensing mode-timed dispense, copy dispense, volume dispense. Suck back angle can be set arbitrarily within 720 degree.
4. The flow rate can be calibrated; Start/stop/reverse are available; Full speed can purge the tubing rapidly.
5. These precision drives offer analog remote control options such as capacitance sensor, liquid level sensor, photoelectric sensor and foot switch -ideal for automated process applications.
6. Using the stepper motor to control speed, high precision and is not affected by the change of load, large torque, low power consumption, strong adaptability.
7. Excellent driving circuit performance, good heat dissipation, low noise, stable running, with power off memory function. Conformal coating is used on the circuit board, anti interference characteristics and wide voltage design, suitable for complex environment.
8. PP-Z series have handles, easy to carry. Can accept multiple pump heads.
It is used for precise filling and mechanical matching of small and medium doses of various liquids, such as pharmaceutical, food, chemical, biological, laboratory, environmental engineering and other industries; the most prominent feature of the product is their high linearity and stable flow ; Good flow repeatability, the tube is not easy to run out of the pump head and the tube is forced, and the reliability is high.
|Drive Model: PP-Z400||Pump head model: PH-Z1460|
|RPM||0.1-400rpm||Dispensing time||0.1-999.9S||Using tubing||13#、14#、19#、16#、25#、17#、18#|
|Dispensing volume||15μL-9999L||Flow range||0.0063-1460mL/min|
|Filling volume resolution||0.001-0.01mL
(Different according to the tubing)
|Times||0-9999 (0 Infinite loop)||Tubing wall||1.6mm||Roller seal||Yes|
|Repeat error||±0.5%||Intervals||0.1-999.9s||Pressure adjust||No||Factory pressure||0.15Mpa|
|Retention error||100rpm，1% within 68 hours
(Filling special tube)
|Suction angle||0-720°||Shell material||PPS|
|Display||LCD screen (3.5 inch)||Protection level||IP31||Roller material||SS|
+Digital control knob
|Working environment||Temperature, 0℃ to 40℃
Relative humidity < 80%
|External speed control||0-5V (optional)、0-10V (optional)、4-20mA (standard), 0-10K (standard)|
|Type of external control||Start /stop, Direction change TTL 5V (standard), TTL 12V (optional), TTL 24V (optional)|
|Port output||DC12V Power Output; DC5V TTL Output (optional)|
|Communication Interface||RS232, RS485 (Start/stop, Direction change, speed control)|
|Power supply||AC220V±10%, 50Hz/60Hz(standard); AC110V±10%, 50Hz/60Hz; AC380V±10%, 50Hz/60Hz(optional)|