Chat with us, powered by LiveChat
Home>Products>Evaporation System>Rotary Evaporators>Rotary Evaporator, REV-1005II

Rotary Evaporator, REV-1005II

  1. Rotary Flask Volume: 5L
  2. Rotation Speed: 0~120 RPM
  3. Temperature Range: RT ~180℃
  4. Lift Mechanism: Automatic
  5. Vacuum: 0.095Mpa

Share the product

Description

Working principle

The evaporation bottle rotates at a constant speed and the water bath is heated at a constant temperature. Under this condition: the material forms a large-area uniform thin film on the inner wall of the evaporation bottle for quick evaporation. The evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). When the solvent vapor passes through the glass condenser coil, the vapor is cooled to a liquid (a cooling device need to be connected) and recycled in a collection flask.

This series of products needs to be equipped with vacuum devices (circulating water type, rotary vane type, diaphragm type and other vacuum pumps), or cooling and circulating devices to form a system devices.

Basic configuration

  • The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
  • The stent is made of cold plate anti-corrosivespray + aluminum alloy material, and the bath is made of 304 stainless steel.
  • The sealing system uses PTFE + fluororubber compound sealing.
  • Oily vacuum pressure gauge shows real-time vacuum by
  • The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.
  • Upright double-layer serpentine coil as condenser
  • Large LCD display, which can control rotation, heating and lifting at the same time
  • Using brushless deceleration booster motor as rotary motor, no spark and low noise.
  • Lifting motor also uses this kind of
  • Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath
  • The bath can be lifted electrically. A silicone cover is equipped outside the bath for heat insulation and anti-scalding.
  • Rotating and heating double fusessafety protection
  • The collection bottle has a lower dischargingport, equipped with glass + PTFE independent discharge valve.
  • There is a water dischargingvalve at the bottom of the bath to facilitate liquid discharge
  • Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation
  • Over-temperature protection function, when the actual temperature> setting temperature+5 ℃, the machine will automatically power off
  • Anti-drying function, when the water level in the heating bath is lower than the heating tube, the machine will automatically power off
  • If the power is suddenly cut off while the machine is working, the machine will automatically stop heating when the power is turned on again

Specifications

Model REV-1005II
Voltage/Frequency 220V 50Hz/110V 60Hz
Total Power 2100W
Rotary motor power 60W1/5
Lifting motor power 40W1/12.5
Heating power 2000W
Vacuum 0.095Mpa
Rotary flask volume 5LΦ230mm/Φ80 flange port
Collecting flask volume 3LΦ195mm/upper Φ50 flange port×Φ35 flange port×2 pcs × lower Φ50 flange port
Rotary speed 0-120rpm/min
Temperature control range Room temperature-180℃
Temperature control accuracy ±1℃
Bath lifting stroke 140mm
Condenser dimension Φ120×600H(mm) side Φ50 flange port × lower Φ50 flange port
Condensing area 0.5㎡
Gas cylinder Left Φ35 flange port, side Φ50 flange port, rightΦ50 flange port
Material feeding valve Φ35 flange port, glass + PTFE valve, material feeding valve (pagoda joint) with 12mm outer diameter
Releasing valve Φ35 flange port×2, glass + PTFE valve, releasing valve (pagoda joint)with 12mm outer diameter
Material discharging valve Φ50 flange port, side discharging valve (pagoda joint) with 20mm outer diameter, 260mm from the ground
Vacuum nozzle Pagoda joint with 10mm outer diameter
In and out circulating nozzle of condenser coil Pagoda joint with 16mm outer diameter
Bath dimension/weight Φ295×175H(mm) about 12L
Overall dimension(W*D*H) 980×480×1260mm
Net weight 46KG
Packing dimension 800×450×1090mm wooden package 0.39m³
Packing weight 68KG

    Contact Us Now!

    We will usually contact you within 24 hours. You could also call us (+86-531-88982330) during working hours ( 8:30 am to 5:45 pm UTC+8 Mon.~Sat. ) or use the website live chat to get prompt reply.

    Contact Info

    17th floor, Mingsheng Building, Xinluo Street, Jinan

    Phone: +86-531-88982330

    Fax: +86-531-88983691

    Web: www.bioevopeak.com

    Go to Top