- Capacity: 30L, 70L, 140L, 240L, 420L, 600L, 900L
- Temperature range: RT+10-250℃(A series); RT+10-300 ℃(B series)
- Safety device: Leakage protector/Over- temperature alarm
-
-
- Capacity: 20L,50L,100L,200L,640L
- Temperature range: RT.+10~250℃
- Test hole: Optional φ25,50,80,100mm
- Safety device: Leakage protector/Over- temperature alarm
-
- Volume: 30L, 45L, 65L, 85L, 125L, 230L
- Temp.range: Incubator:RT+5-80℃; Drying oven:80-300℃
- Temp. Uniformity: Incubator: ±1.0℃; Drying; oven: ±2.5%
- Temp.control: PID Two temperature section intelligent PID
- Cycle Mode; Forced convection
-
- Volume: 640L, 1000L, 1300L, 1870L, 3070L
- Temp. Range: RT+10-250℃, RT+10~300℃
- Temp. Resolution Ratio: 0.1℃
- Exhaust hole: On top or side
- Temp. Control: PID intelligent control or Multi - segment
-
- Temp. range: 50℃- 500℃
- Top-mounted air outlet
- LED digital tube display
- Pull-out movable shelf
-
- Good thermal insulation design
- Stainless steel axial flow fan blades
- Pull-out movable shelf
- Internal volume (L): 27L - 216L
-
- Volume (L): 24, 52, 91
- Temperature variation (℃): RT+10-250℃
- Timing over-temperature alarm
- Dual-screen high-brightness digital tube display
-
- Capacity: 52L, 91L
- Temp. Range: RT+10-250℃
- Power: 1.6kW, 2.0kW
- NW/GW(kg): 87/112, 102/125
-
- Cycle Mode: Forced convection
- Temp. Range: RT+10-300℃
- Two temperature section PID intelligent
-
- Conductivity Range: 0~200.0mS/cm, five kinds of measuring range can be switched
- Conductivity Resolution: 0.001μS/cm, 0.01μS/cm, 0.1μS/cm
- Conductivity Accuracy: ±0.5% (FS)
- Conductivity/TDS/Salinity/Resistivity/Temperature
-
- Capacity: 24L,52L,91L
- Vacuum Degree Range: <133Pa
- Temp. Range: RT+10-250℃
-
- Capacity: 52L, 91L
- Temp. Range: RT+10-250℃
- Power: 1.6kW, 2.0kW
- NW/GW(kg): 67/92, 82/105
-
- Intelligent operation system
- Automatic/Manual temperature compensation
- IP54 waterproof.
- Settable cell constant
-
- Test six water samples at the same time
- Can store the BOD5 result value for 10 years
- Easy to use
-
- Intelligent operation system
- 7.0 inch LCD screen
- IP54 waterproof.
- Support for USB or RS-232 communication
-
- LCD display, simple interface. Easy to set up and use.
- Accurate temperature control, high stability.
- With four groups(A/B/C/D), timing independently or simultaneously.
-
- Conductivity Range: 0~20.00mS/cm, four kinds of measuring range can be switched
- Conductivity Resolution: 0.01μS/cm, 0.1μS/cm, 1μS/cm
- Conductivity Accuracy: ±1% F.S.
- Calibration Points: 1 to 3 points
- Conductivity/TDS/Salinity/Temperature
-
- Dynamic measurement
- With compensation port
- Easy to measure and widely applicable
-
- Large LCD touch screen
- Minimum reading: 0.01% (transmittance); 0.01%(haze)
- USB port
- Transmittance: 0~100.00%
- Haze: 0~30.00%
-
- In conformity with the standard of GB/T 2410-2008, ASTM D1003-2007, JISK7105-81
- Microcomputer control
- Measurement range: Transmittance: 0~100%; Haze: 0~30% (absolute), 30.1~99% (relative)
- Minimum reading: 0.1% (transmittance), 0.01% (haze)
-
- With automatic storage function
- Any time to view the test data
-
- Volume: 25L, 54L
- Temp.Range(℃): RT+10～200
- Temp. Fluctuation:±1℃
- Temp. Uniformity:±2.5℃%
-
- Suitable for Android smartphone or tablet
- The tester contains the conductivity, TDS, salinity, resistivity and conductivity ash measurement modes
- Accuracy: 0.5% F.S
-
- Capacity（L/cu.ft):100/3.53
- Temperature range（℃）:-25~-10℃
- Advanced Cooling System:Reasonable refrigeration layout, more stable refrigerant, High cooling efficiency and fast cooling speed
- Stable and high precise temperature control: Accuracy up to 0.1℃; Can run smoothly at the lowest temperature for a long time
- Convenient after-sales service: 2 years warranty
Get Social